FTC320 analyzer

with improved measurement characteristics for many tasks

The FTC320 is the new generation of our thermal conductivity analyzers. With the new electronics, the measurement accuracy has been improved compared to the FTC300. The already low noise of our analyzers has been further reduced. This is particularly crucial for measurements in the trace range.
New measurement tasks can be realized with the FTC320. In particular, the possibility of cross-sensitivity compensation using external signals has been expanded. This is made possible by the larger program memory and significantly more computing power. A good example from the practical application is the use of the additional module for oxygen measurement. The increased computing power of the FTC320 allows cross-sensitivity compensation in real time.

For a more intuitive use, the operating menu has been slightly revised. As usual, data access is possible via an RS232 interface. The mounting dimensions as well as the analog interfaces (4-20mA, 0-10V and relays) stay the same compared to the FTC300. Those who are familiar with the FTC300 will also quickly get to work with the FTC320.


The FTC320 is the new generation of our thermal conductivity analyzers. With the new electronics, the measurement accuracy has been improved compared to the FTC300. The already low noise of our analyzers has been further reduced. This is particularly crucial for measurements in the trace range.

New measurement tasks can be realized with the FTC320. In particular, the possibility of cross-sensitivity compensation using external signals has been expanded. This is made possible by the larger program memory and significantly more computing power. A good example from the practical application is the use of the additional module for oxygen measurement. The increased computing power of the FTC320 allows cross-sensitivity compensation in real time.

For a more intuitive use, the operating menu has been slightly revised. As usual, data access is possible via an RS232 interface. The mounting dimensions as well as the analog interfaces (4-20mA, 0-10V and relays) stay the same compared to the FTC300. Those who are familiar with the FTC300 will also quickly get to work with the FTC320.

Selective oxygen measurement

sauerstoffAn optional add-on module for oxygen measurement extends the application range of the FTC320 to non-binary gas mixtures with oxygen content. The electrochemical cell has a long service life of 1 to 6 years. The cell can be replaced by the customer.Oxygen concentrations from 0-100 vol.% can be measured selectively. The measured concentration can be used for cross sensitivity compensation. The additional module is pneumatically connected to the gas output of the FTC320. The voltage supply, operation and all interfaces run via the FTC320. The measured oxygen concentration is shown on the display.
If required, adjustment can be made via the operating menu or via the RS232 interface of the FTC320. Due to an internal compensation of the pressure dependency, the oxygen content can be measured reliably even in case of pressure fluctuations.

sauerstoff

An optional add-on module for oxygen measurement extends the application range of the FTC320 to non-binary gas mixtures with oxygen content. The electrochemical cell has a long service life of 1 to 6 years. The cell can be replaced by the customer.

Oxygen concentrations from 0-100 vol.% can be measured selectively. The measured concentration can be used for cross sensitivity compensation. The additional module is pneumatically connected to the gas output of the FTC320. The voltage supply, operation and all interfaces run via the FTC320. The measured oxygen concentration is shown on the display.
If required, adjustment can be made via the operating menu or via the RS232 interface of the FTC320. Due to an internal compensation of the pressure dependency, the oxygen content can be measured reliably even in case of pressure fluctuations.

Specification

General:
Measurement process Thermal conductivity
Sampling Analyzer extractive
Connection 6mm pipe
Dimensions (WxHxD in mm) 145x80x85
Protection class IP 65
Pressure-proof to 20 bar absolute
Pressure proof range (Oxygen module) 0.75 to 1.25 bar absolute
Power supply 18V to 35V DC / 700mA
Ambient temperature range (Lowest -10°C when filled with glass beads)
Weight to 1800g
T90 time at 60l/h < 1sec
Communication:
RS232 Yes
Current output 1x, 0/4-20 mA
Voltage output 2x, 0-10V
Display Yes
Relays 3x
Service program SetApp 2.0 No
Calibration on site Yes
Options
Flow measurement
Flow monitor
Infrared measurement
Multi Gas Mode Yes
Protection against corrosion Yes
Protection against condensate and dust Yes
Suitable for inflammable gases Yes
Moisture measurement
Cross-sensitivity compensation Yes, external signal required
Specifications gas analysis
Noise < 1% of smallest range
Drift at zero point per week < 2% of smallest range
Repeatability < 1% of smallest range
Non-linearity < 1% of range
Measuring error with ambient temperature change per 10°K < 1% of smallest range
Flow influence between 60l/h and 90l/h per 10l/h < 1% of smallest range
Fault with measurement gas change (Pabs > 800 hPa) per 10 hPa < 1% of smallest range

Options

Protection Against Corrosion

Protection Against Corrosion

Measurement of Combustible Gases

Measurement of Combustible Gases

Cross-sensitivity Compensation

Cross-sensitivity Compensation

Protection Against Condensate and Dust

Protection Against Condensate and Dust

Multi Gas Mode

Multi Gas Mode

Oxygen (O2) Analysis

Oxygen (O2) Analysis

Measurement Components and Ranges

Specifications additional module: Selective oxygen (O2) measurement

Order a Quote

Please do not hesitate to contact us if you would like a quote or have a question. You can reach us via the contact form and via the e-mail address below.
Before making an offer, we clarify the requirements with a form for the measuring task. This way we want to make sure that you will receive the device from us that best fits your measuring task.

Contact Info

phone : +49 (0) 69 530 564 44

fax :   +49 (0) 69 530 564 45

e-mail:   info@messkonzept.de

When submitting the data entered in the contact form by clicking on the button below, you declare that you have read the privacy policy and that you agree that the data provided will be collected and stored electronically.

The data is used only strictly earmarked for processing and answering your request.

By submitting the contact form you agree to the processing. You may revoke your consent at any time with future effect. In case of cancellation your data will be deleted immediately.

HOW CAN WE HELP YOU?

Please enable JavaScript in your browser to complete this form.